NVR Firmware Download

Version 11166

Supported NVR models:

  • NV40-P2B
  • NV80-P2B
  • NV160-P2B
  • NV80-P2A
  • NV160-P2A

Note: We recomend you update all camera firmware to firmware version pa20140801NSA or higher to use with this firmware version.

Improvements and Fixes:

  • Default Noise Reduction PnP settings changed to SPQ OFF, 3DNR LOW and Max Gain 2 to improve IR performance
  • Video export maximum size limit of 8.5GB has been removed when exporting as SYSTEM
    • Exports using AVI & DRV format are still limited to 8.5GB
  • Improved screen division display options for easier navigation on the local NVR
  • AVI clip attached to email alarm notifications now displays longer video clip
  • Various bug fixes

Previous Version Improvements & Resolved Issues

  • Cameras with 90 degree rotate enabled now hold proper aspect ratio in browser-based remote software
    • Support added for 3MP resolution cameras
  • PnP default settings updated for 3MP cameras
    • P2B NVR models will use 3MP resolution settings for 3MP cameras
    • P2A NVR models will use 2MP resolution settings for 3MP cameras
      • If you manually change camera resolution to 3MP, AvertX recommends connecting a maximum of 8 cameras on 16CH P2A NVRs (or 4 cameras on 8CH P2A NVRs)
  • Various bug fixes
  • Remote Control ID setup simplified. The menu items has been relabeled to “Remote Control ID” and displays the Remote Control ID number selection
  • DDNS update checks are more frequent. DDNS checks for updates every 5 minutes to minimize any down-time caused by forced ISP IP change
  • If a system fan fails, an icon will appear in the live view but there is no beep

Download

AvertX_HDIP_NVR_firmware_11166.zip
80mb
October 2014

Supported NVR models:

  • NV40-P2B
  • NV80-P2B
  • NV160-P2B  
  • NV80-P2A
  • NV160-P2A

There is no other warranty provided by AvertX, express or implied including without limitation the warranties of merchantability and fitness for a particular purpose. 

How do I update the firmware on my HDIP recorder?

Locate the Current Firmware Version on Your NVR:

  1. Press the Menu Button on your remote control
  2. Navigate to the Info icon
  3. The firmware version number will be listed as Software. The last four digits of the number is the current firmware version number installed on the NVR. If the number on the firmware is lower than the version listed at the top of the page, please update your firmware.

NOTE: If the current firmware version on your NVR is lower than 9407, you must first install version 9407. After that update is complete, you can upgrade your firmware to the latest version.