How do I set up Port Forwarding on my P2A/P2B or Performance Series Recorder?
The IP address of your recorder is identifiable within your network. In order to be able to access your recorder from a remote location through the internet, you will need to configure your router to forward the information from the internet to your recorder. The default port for your recorder is 80. In order to forward information to this port, follow these instructions.
Configure Your Router
These directions are generic. If you are not familiar with this process, you should consult the user manual of your router. Other references that might be useful are the manufacturer website, support line, or a website such as PortForward.com.
- For P2A/P2B Model
Configure Your Recorder
1. On the Menu screen, click System
2. Set your recorder to Advanced Setup Mode.
3. Click Network.
4. Click Web Port.
5. Verify that the port designated on your recorder is the same as the port you have chosen on your router. The default port is 80.
6. To change the web port, click Num and type your desired port number. This must be the same as the port configured on your router for remote access to function.
7. Click OK.
8. Right-click to return to the Main menu.
9. Right-click again to return to the Live screen.
- For Performance Series Model
Configure Your Recorder
1. On the Menu bar, click Setup.
2. Click System Setup.
3. Click Network Setup.
4. Click General Settings tab.
5. Look for Web Port.
6. Verify that the port designated on your recorder is the same as the port you have chosen on your router. The default port is 80.
7. To change the web port, click the Keyboard icon and type your desired port number. This must be the same as the port configured on your router for remote access to function.
8. Click OK.
9. Close Setup to return to the Live screen.
