Camera Firmware Download

IPC-B6203.3.82.C055123.NB.230306.zip

Supported camera models:

• HD848 

This version is a Minor update with the following changes from version IPC-B6203.3.15.C05573.NB.211115; 

• NEW Added bounding boxes to low stream to show detected people & vehicles
• Bounding boxes can be disabled in video setup
• IMPROVED Improved event reporting accuracy to Proconnect Server
• IMPROVED Reduced false alarms caused by static objects
• IMPROVED Fixed an issue causing objects outside of the rule area to be detected
• IMPROVED Fixed an issue causing Person detection notifications to be delayed over ONVIF

It is important to install firmware updates for your camera when updates to ensure the latest security and system protections. You can update firmware on multiple AvertX cameras at one time if you’re on the local network using the Network Camera Manager application. If you need to update cameras remotely, you can access the camera using Camera Link.

To update the Firmware on your camera:

1. Download the firmware update .zip file.
2. Connect to the camera in the Cameras menu.
3. Click Setup on the top menu.
4. Click Maintenance > Maintenance on the side menu.
5. Under Software Upgrade, click Browse and navigate to the firmware file saved on your local PC.
6. Click Upgrade and then click OK to confirm that you want to upgrade the software.
7. After you see the message “Upgraded Successfully. Please log in.” refresh the browser page.

Reset the Factory Default Settings

1. Enter the camera credentials to log in.
2. Click Setup on the top menu.
3. Click Maintenance > Maintenance on the side menu.
4. Under Config Management, click Default to restore factory default settings and then OK to confirm.

NOTE: The camera password and network settings will remain unchanged. All other camera settings will be reset to factory default settings.